Description
RXP-X 260 STAGE 4 KIT
This kit delivers a significant level of performance (+13mph on U.S. models) through easy to install, bolt-on engine, exhaust, and pump enhancements. Requires use of fresh premium octane pump fuel (91~93).
RIVA Power Filter Kit is installed. Air intake is relocated forward away from hot engine delivering cold, fresh air to engine via large 4” smooth-bore ducting that is attached to supercharger with unique velocity stack and sturdy billet clamps.
RIVA Catch Can/Engine Breather Upgrade Kit is installed. Easy to install catch can/oil breather eliminates power-robbing crankcase fumes and oil vapor from your engine’s air intake. Increases horsepower by removing the engine’s requirement to burn relatively non-combustible oil. Also improves intercooler efficiency by preventing the oil sludge coating that lowers thermal efficiency.
RIVA XXX-2 Charger is installed. Complete supercharger assembly features a sophisticated, lightweight 140mm Vortech impeller that is precision balanced to deliver smooth operation, a billet spacer, machined front & rear housings and RIVA Heavy Duty Clutch Washers. Increased interior volume produces huge performance gains in acceleration and top speed.
RIVA Power Cooler Tube Upgrade Kit is installed. High strength aluminum tubes are shorter than original to minimize boost loss. Rigid aluminum will not swell under pressure like original soft rubber hoses providing improved throttle response & reliability. Includes integrated blow-off valve mount for improved reliability and performance. RIVA/HKS Blow-Off Valve (sold separately) eliminates unwanted pressure during off-throttle operation reducing supercharger clutch wear and eliminating heat soak in discharge tube.
RIVA ‘GEN-3’ Power Cooler is installed replacing original intercooler system. Power Cooler is dramatically more efficient than original intercooler system delivering an increase of 15 peak horsepower with exit temperatures averaging 50°F cooler than stock. Features large, unrestricted core that exhibits minimal pressure loss compared to stock intercooler.
RIVA Intake Manifold Upgrade Kit is installed. Removal of restrictive screen element from inside of intake manifold enables your engine to produce more horsepower through increased boost pressures (+1lb). Special o-ringed, billet block-off plug with integrated fitting for aftermarket boost pressure gauge fills opening left after removal of screen element.
RIVA Fuel Pressure Regulator Kit is installed. Kit provides precision control of fuel pressure to meet fuel requirements of modified engine. RIVA Stage 4 Kit requires a consistent fuel pressure of 58psi (static/non-rising rate). OEM fuel pressure varies between 48~58psi. Plugs directly into original fuel system with OEM connectors and features a large 3/8″ fuel return line. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-Off necessary for removal of stock fuel pressure regulator in fuel tank.
RIVA Pro-Series Fuel Injector Kit is installed. Our 100lb racing injectors flow more fuel to match the needs of our Stage 3 modifications.
RIVA Valve Train Upgrade Kit is installed. Titanium valve retainers and heavy-duty valve springs increase reliability of modified engine by recucing the possibility of valve float at high RPM. To ease installation of Valve Train Upgrade Kit we offer a unique Valve Compression Tool that allows installation without removal of cylinder head saving you time and money.
RIVA Pro-Series Water Box is installed. Developed on a flow bench to deliver increased horsepower and performance by reducing exhaust restriction and back pressure. Innovative short design allows easy servicing of supercharger without removal of exhaust system. High strength aluminum construction & precision welds will survive backfires & overheating. Mandrel bent Aluminum Exhaust Tube couples water box to Billet Rear Exhuast Outlet for added reliability, performance and serious cool factor.
RIVA/ViPEC V88R3 Pro-Series ECU is installed. Our racing ECU provides huge increases in performance and matches the needs of your modified engine. Base maps are calibrated to provide optimum fuel delivery, ignition timing and rev limit to compliment the Riva Racing Performance Kits. OEM dash display, engine diagnostics & engine safety functions are retained. This ECU also provides “First In – First Out” data logging. This internal data logging function continuously records engine data, overwriting oldest data when the memory is full. This ECU is fully programmable, allowing the user to adjust or create new parameters. Includes input for optional Lamda sensor kit for data logging air/fuel ratios & tuning functions. ECU plugs directly into OEM wire harness and mounts directly in place of the stock ECU.
NOTE: To keep you up to date with the latest maps, software and accessories visit our dedicated ECU Manager web site.
RIVA Open Loop Cooling Kit is installed. Open loop system increases cooling efficiency via steady supply of cool external water dramatically reducing engine operating temperatures for improved performance & reliability.
Solas ‘R’-Series Concord Impeller is a special performance impeller offered exclusively by RIVA and RIVA authorized dealers. This impeller is specifically pitched for our specifications using a pitch block to ensure accuracy. Billet impeller cone is included.
NOTE: RIVA Performance Kits intended for competition use only.